Ауди А6

[Fontom]

Может кто-нибудь знает, как запрограммировать ключ на А6.А то замок зажигания меняли и теперь центральный замок не работает с ключа.

[Diagnoster]

PROGRAMMING

 

WHEN

 

Key added or replaced.

System malfunction.

 

HOW

 

NOTE: A maximum of 4 keys can be programmed (one at a time)

 

 

Memory positions of existing keys can be identified using diagnostic equipment.

If diagnostic equipment available:

Locate vacant memory position for new key.

Locate memory position of key to be replaced.

Carry out programming procedure for this key only.

if diagnostic equipment not available: Obtain and reprogram all keys.

 

Switch ignition ON. Use key not fitted with remote controI.

Manually lock driver's door using key.

Complete the following within 30 seconds:

Within 5 seconds press unlock button on first key once (programs memory position 1).

Indicator lamps flash once to indicate signal received.

Wait 5 seconds.

Press unlock button once to confirm programming.

Vehicle unlocks. Programming mode deactivated.

Switch ignition OFF. Remove key.

To program remaining keys into memory positions 2, 3 and 4. Carry out the complete procedure

for each key:

Switch ignition ON. Use key not fitted with remote controI.

Manually lock driver's door using key.

Within 5 seconds press unlock button at 1 second intervals, as follows:

Twice for memory position 2 (second key).

Three times for memory position 3 (third key).

Four times for memory position 4 (fourth key).

Indicator lamps flash once every time unlock button is pressed to indicate signal received.

Wait 5 seconds.

Press unlock button once to confirm programming.

Vehicle unlocks. Programming mode deactivated.

Switch ignition OFF. Remove key.

 

NOTE: Ignition must be switched off between each key programming procedure

 

 

MEMORY ERASE PROCEDURE

 

WHEN

 

Lost key fitted with remote controI.

Incorrect number of keys supplied with vehicle.

 

HOW

 

Switch ignition ON.

Manually lock driver's door using key.

Press unlock button 5 times, at 1 second intervals.

Indicator lamps flash once every time unlock button is pressed, to indicate signal received.

Wait 6 seconds.

Press unlock button once (to confirm erase procedure).

Switch ignition OFF. Remove ignition key.

Remote controls should no longer operate system.

Obtain and program all keys.

[Guest bogd]

А можно при помощи КТС

[ddk_f]

По диагностике не предусмотрено в А6 (4B), А8 (4D), A3(8L) .