Toyota Camry 2007 год европеец

[Vadim_Orsh]

Всем, здравствуйте! Парни, подскажите, плиззз, как привязать кнопки на этом пепелаце. Спасибо заранее.

[Барбос]

ПОд кнопками понимать Радиоканал ?

 

Remote alarm/central locking

System operation

Pressing lock button activates alarm and central locking Fig.1.

Vehicles with double locking:

Pressing lock button again within 5 seconds of locking vehicle activates double locking system.

Pressing unlock button deactivates alarm and double locking system.

Pressing unlock button deactivates alarm and central locking.

If vehicle unlocked and doors or boot/tailgate not opened within 30 seconds, locks/alarm are reactivated.

Key fitted with boot/tailgate release button.

Programming

When

Key added or replaced.

System malfunction.

How

Driver's door open and key removed from ignition switch.

Insert key into ignition switch, then remove it.

Within 5 seconds:

Insert key into ignition switch, then remove it.

Within 40 seconds:

Close and open driver's door twice.

Insert key into ignition switch, then remove it.

Within 40 seconds:

Close and open driver's door twice.

Insert key into ignition switch.

Close driver's door.

Switch ignition ON and OFF once to program a new key code whilst retaining the original codes or twice to program a new key code whilst erasing the original codes.

Remove key.

System should now lock and unlock vehicle, once or twice depending which mode has been selected.

Carry out the following button procedure within 40 seconds:

Press key lock or unlock button once.

Within 3 seconds: Press same key lock or unlock button once.

System should now lock and unlock vehicle.

NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat button procedure.

If required repeat button procedure to program remaining keys.

NOTE: To exit programming mode: Open driver's door.NOTE: A maximum of 4 keys can be programmed.

Battery replacement - type 1

Battery replacement - type 2

Immobilizer

System operation

System arms after switching ignition OFF.

Programming

When

System malfunction.

Key added or replaced.

How

Immobilizer can only be programmed using diagnostic equipment.

NOTE: A maximum of 5 black keys and 3 grey keys can be programmed.

[Vadim_Orsh]

Спасибо, дружище, я знаю такой способ, но только почему-то эта процедура не проходит.

[Барбос]

А эта процедура отличаеться от вышеописанной?

 

Programming

When

 

Key added or replaced.

System malfunction.

How

 

Driver's door open and key removed from ignition switch.

Within 5 seconds:

Insert key into ignition switch and remove it twice.

Within 40 seconds:

Close and open driver's door twice.

Insert key into ignition switch, then remove it.

Within 40 seconds:

Close and open driver's door twice.

Close driver's door.

Insert key into ignition switch.

Switch ignition ON and OFF once to program a new key code whilst retaining the original codes or twice to program a new key code whilst erasing the original codes.

Remove key.

System should now lock and unlock vehicle, once or twice depending which mode has been selected.

Carry out the following button procedure within 40 seconds:

Simultaneously press and hold key lock and unlock buttons for 1-1,5 seconds.

Within 3 seconds:

Press key lock or unlock button for a minimum of 1 second and release.

System should now lock and unlock vehicle.

NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat button procedure.

If required repeat button procedure to program remaining keys.

NOTE: To exit programming mode: Open driver's door.NOTE: A maximum of 4 keys can be programmed.

[Vadim_Orsh]

Насколько мне позволяет мое знание ангелького, практически нет, за исключением концовки. Но как раз я и не могу добиться, чтобы система целкнула сама замками....

[guam]

Потому что на камрюхе 40 кузове процедура не получается,я тоже пробывал,прописал только прибором

[Vadim_Orsh]

А каким?

[puhovick]

дилерский точно привяжет

может справится и Т300 или мультимарочный сканер

вручную не делается с 2006 года