Jump to content

2006 Subaru Legacy


Recommended Posts

you can pull codes by watching airbag light flash count

remove lower panel under steering column locate 2 loose

green connectors and follow that harness up and you will

find a black u connector and farther up there will be 2

pins with black wires. connect terminal a to pin 1 and read

codes. then to clear connect terminal b to to terminal 2

for 3 seconds. airbag light will flash for 0.6 second

intervals if codes were cleared

Link to comment
you can pull codes by watching airbag light flash count

remove lower panel under steering column locate 2 loose

green connectors and follow that harness up and you will

find a black u connector and farther up there will be 2

pins with black wires. connect terminal a to pin 1 and read

codes. then to clear connect terminal b to to terminal 2

for 3 seconds. airbag light will flash for 0.6 second

intervals if codes were cleared

 

 

Где ти видел {2 loose

green connectors }на субару 2006 года.?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


×
×
  • Create New...